Really really right stuff - The Really Right Stuff Leica Q3 Plate is custom designed to make the most secure fit possible. Each plate is precision machined from solid blocks of 6061-T6, aircraft grade aluminum for durability and strength. The Leica Q3 camera plate is fully compatible with any standard 1.5"-dovetail style quick-release system. The plate also has contoured ...

 
Really really right stuffReally really right stuff - Multi Clamp. $190.00. Explore our multi-clamp options. Designed with versatility and stability in mind to make mounting your gear easier.

Really Right Stuff TQC-14 Tripod Review. I used to have a wooden tripod. It was not as bad as it sounds — other photographers were always fascinated by the design, and it was sturdier than you might expect. Unfortunately, despite weighing 4.2 pounds, it had a maximum height of just three feet. The Really Right Stuff LCF-101 foot replacement is precision machined from a solid block of 6061-T6 aluminum and is fully compatible with 1.5" This updated foot (updated design based on LCF-100) replaces the Sony lens collar foot on Sony FE 100-400mm f/4.5-5.6 GM OSS, FE 70-200mm f/2.8 GM OSS, FE 70-200mm f/2.8 GM OSS II, or Sony FE 300mm f/2.8 ... Camera accessories company Really Right Stuff (RRS) has announced that it will be moving both its headquarters and its manufacturing operations to Lehi, Utah, where it will have access to a building that is 2.5 times larger than its current location. The company points toward increasing costs in California, where it is presently located, as …TA-LBC: Round Lever Release Clamp. $155.00. Effortlessly secure your gear with lever-release clamps. Elevate convenience and stability. Explore our lever-release clamps now!Cinch-LR Bino Adapter. $50.00. Discover the Cinch-LR from RRS. A binocular mount offering uncompromising stability and adjustability, enhancing your outdoor viewing experience. SKU:The MPRS-40 and MPRS-80 are made for the Canon 800mm and 600mm F/11 prime lenses. These lightweight, extendable lenses makes proper balancing difficult; the MPRS-40 and MPRS-80 solve that problem by allowing the foot to slide back to the balance point when the lenses are extended for use, and forward when in the stowed position. The …Overview. The BD850-UL is the ultralight alternative the full-feature modular BD850 L-set for the Nikon D850 camera. The BD850-UL is perfect for those who want a low-profile and ultralight design. Really Right Stuff camera body plates are all custom designed for each camera body and precision machined from solid blocks of 6061 …Really Right Stuff foot replacements are precision machined from solid blocks of 6061-T6 aluminum and are fully compatible with 1.5" RRS Dovetail Standard. This foot replaces the Nikon lens collar foot on the Nikkor 200-400mm VR and VR-II, 300mm/f2.8 VR and VR-II lenses. Features.Cinch-LR Bino Adapter. $50.00. Discover the Cinch-LR from RRS. A binocular mount offering uncompromising stability and adjustability, …The Really Right Stuff Collar Foot Package for Nikon AF-S 200-500mm f/5.6E ED VR Lens replaces the original manufacturer's collar and foot. This replacement lowers the height of the lens and gives more support and stability when rotating the lens within the collar. This accessory also adds a double dovetail design to the foot, …The Really Right Stuff BH-55 Ball Head is, at review time, the 4th best-selling ball head at B&H . That fact is especially impressive when it is considered that the BH-55 costs more than 2x as much as the top 3 best-selling heads combined and more than 4x as much as the most expensive of the three.Designed for the mobile phone photographer, the Really Right Stuff Phone Clamp is our elegant solution for securely mounting almost any phone. …Really Right Stuff camera body plates are all custom designed for each camera body and precision machined from solid blocks of 6061-T6 aluminum. Fully compatible with any RRS quick-release system, our plates feature precisely contoured anti-twist flanges for a perfect fit that prevents twisting between the …Really Right Stuff boompoles are made in the U.S.A. and are backed by a 5-year warranty and unmatched customer support. * Length with cable cage detached . Features. VMB-34 Full Boom. CNC machined 6061-T6 Aluminum components; Stiff carbon fiber tubes ; Easy-to-use, sealed twist locks with rubber over moldingMPR-113 Overview. MPR-113 is a double dovetail Multi Purpose Rail. Use as a plate for some large format cameras and some telephoto lenses. Features The PC-LR features a built-in dovetail base, allowing you to mount it onto any Really Right Stuff ball head clamp. This allows using the ballhead itself to level the panning axis, thus eliminating the need for a leveling base in many applications. The increased speed and accuracy offered by the panning clamp makes setup for single-row panoramas ... TA-LBC: Round Lever Release Clamp. $155.00. Effortlessly secure your gear with lever-release clamps. Elevate convenience and stability. Explore our lever-release clamps now!Really Right Stuff make several different leveling heads to suit their range of tripods, and all of them have the option to include a lever-release lamp on the top to aid for quickly switching between different types of heads. TA-2U …The Really Right Stuff BOEM5III camera body plates are the premiere solution for mounting your Olympus E-M5 Mk III camera securely to your tripod. Our BOEM5III plates are custom designed and precision machined from solid blocks of 6061-T6 aluminum. Fully compatible with 1.5" RRS Dovetail Standard, this plate features precisely contoured …Home. More. Accessories. Video / Cinema. Mobile Phone. Macro. Flash. Tools. Hardware. Last Chance. # of Products: Sort By: All More. Cinch-LR Bino Adapter. $50.00. LCF-21: …PG-01 Compact Pano-Gimbal Head. $255.00. PG-01: Lightweight solution for versatile photographers. Independent pan and tilt control, perfect for single and multi-row panoramas. Easy setup and portability. Home. Heads. PG-01 …Discover RRS's world-class camera gear. Crafted for quality and performance, our tripods, heads, and supports empower photographers to capture perfect shots.The Really Right Stuff Panasonic Lumix S1R L-plate features two dovetail mounting surfaces in the shape of an L: one on the bottom of your camera, and one on the left-hand side. This additional mounting option allows you to quickly change between landscape and portrait orientations while minimizing the need to recompose your shot, saving you ...Consistently cleaning and correctly maintaining your Really Right Stuff tripod will extend its life and keep it performing like brand-new for a longer amount of time. These cleaning tips are applicable to other tripod brands, although the disassembly and reassembly methods will vary depending on the brand.The TFC-34 MK2 Series3 Ultralight Carbon Fiber Tripod from Really Right Stuff is compactly made to be easily packed for travel or storage while maintaining strength and not sacrificing features. The 4-section carbon fiber legs provide a load capacity of 86 lb and a maximum height of 58.3". The sturdy CNC-machined leg apex incorporates 1/4"-20 ...Made from solid stainless steel with ABP (Accidental Backout Prevention) foot grip. This unique seal keeps foot securely mounted without having to use thread locker fluid. Compatible with all RRS Tripods and Monopods, and some other tripods with 3/8"-16 sockets on the leg end; socket must be flush with base of the leg to be …Feb 20, 2019 · In addition to the clamps, Really Right Stuff has developed many different accessories that can be used with the BH-55 ballhead. You can attach panoramic rails, macro rails, 3D / stereographic bars and other accessories made by RRS to extend the functionality of the head. Cinch-LR Bino Adapter. $50.00. Discover the Cinch-LR from RRS. A binocular mount offering uncompromising stability and adjustability, …Elevate your gear with our accessories. Enhance stability and boost creativity by exploring our accessories selection.The Really Right Stuff Collar Foot Package for Nikon AF-S 200-500mm f/5.6E ED VR Lens replaces the original manufacturer's collar and foot. This replacement lowers the height of the lens and gives more support and stability when rotating the lens within the collar. This accessory also adds a double dovetail design to the foot, …The Multi-Clamp securely mounts to any round stock up to 3.5 inches (89mm) in diameter. With the Flat Surface Adapters deployed, mount to any flat surface up to 2.4 inches (63mm) in thickness. There are five threaded holes in the Multi-Clamp: four 3/8"-16 threaded holes, and one 1/4"-20 threaded hole. Use these built-in sockets to mount your ...The Really Right Stuff Ascend-14 Long Travel Tripod gave me reason to again include a 1-series option in the kit. If there is room for a high-performing compact, lightweight tripod in your kit and the funding permits, the Really Right Stuff Ascend-14 has your name on it. This tripod is an outstanding performer despite its small size and light ...Really Right Stuff Ascend-14 4-Section Carbon Fiber Compact Travel Tripod with 22mm Ball Head. $1,555.00 $ 1,555. 00. FREE delivery Jan 31 - Feb 2 . Only 6 left in stock - order soon. Really Right Stuff BH-30 Ball Head with Full Size Lever-Release Clamp, 15 lb Capacity. 5.0 out of 5 stars. 7.Versa Ground Pod : TVC-32G Mk2. $585.00. Explore table top and ground tripods for versatile support. Elevate your photography with stable solutions for various scenarios. Elevate your photography gear with our camera plates. Designed to securely fit your specific camera model, ensuring stability and seamless functionality. Mar 8, 2024 · The Really Right Stuff Leica Q3 Plate is custom designed to make the most secure fit possible. Each plate is precision machined from solid blocks of 6061-T6, aircraft grade aluminum for durability and strength. The Leica Q3 camera plate is fully compatible with any standard 1.5"-dovetail style quick-release system. Really Right Stuff camera body plates are all custom designed for each camera body and precision machined from solid blocks of 6061-T6 aluminum. Fully compatible with any RRS quick-release system, our plates feature precisely contoured anti-twist flanges for a perfect fit that prevents twisting between the …Consistently cleaning and correctly maintaining your Really Right Stuff tripod will extend its life and keep it performing like brand-new for a longer amount of time. These cleaning tips are applicable to other tripod brands, although the disassembly and reassembly methods will vary depending on the brand.Show More. At just 2.9" in height with a 1.2" ball, the BH-30 Ball Head with Full-Size Lever-Release Clamp from Really Right Stuff is a great support solution in a small form factor. With a load capacity of 15 lb, the BH-30 is a great match for pro cameras with lenses up to 70-200mm and mirrorless and bridge cameras alike.The Really Right Stuff BH-55 Ball Head is, at review time, the 4th best-selling ball head at B&H . That fact is especially impressive when it is considered that the BH-55 costs more than 2x as much as the top 3 best-selling heads combined and more than 4x as much as the most expensive of the three.143. In-depth tripod review: Really Right Stuff Versa TVC-34 Mk.2. Published Aug 10, 2021 | Mark Banas. Share. Tweet. Really Right …Really Right Stuff clamps are "open channel" clamps. The advantage of this design is the ability to freely slide the plate within the clamping channel: center your camera for panos, shift a telephoto lens fore or aft to find the best balance point.Jan 10, 2018 · The Really Right Stuff TFC-14 tripod can get very low to the ground, which makes stable shooting from low angles a breeze. The ratcheted angle stops for the legs are easy to use. US Orders Over $100 Ship Free!* US Orders Over $100 Ship Free!* Tripods Features. The lightest leveling base in its class. Compatible with RRS Versa Series 3 Tripods. Holds up to 25 lbs without slipping. Low friction polymer anti-jam plate secures your head solidly and accentuates vibration damping for your load. Delivers 30 degrees of total leveling capability. 3/8"-16 Stainless steel stud for mounting tripod head.Really Right Stuff foot replacements are precision machined from solid blocks of 6061-T6 aluminum and are fully compatible with 1.5" RRS Dovetail Standard. This foot replaces the Nikon lens collar foot on the Nikkor 200-400mm VR and VR-II, 300mm/f2.8 VR and VR-II lenses. Features.Really Right Stuff, LLC (1) Price Update Price Range Other Is Featured (1) In Stock (6) # of Products: Sort By: All Ball Heads. Add to Wishlist Quick view. BH-25 Ball Head Colors Available $180.00 Add to Wishlist ...Really Right Stuff gear can be purchsed directly from RRS, or from B&H Photo. In this post I have linked to B&H Photo because they offer free shipping in many circumstances, and offer the ability to pre-pay tax and duties on many international shipments. Some people might prefer to shop directly from the manufacturers, and I’ve …Fits the X1D & X1DII Models. Really Right Stuff camera body plates are all custom designed for each camera body and precision machined from solid blocks of 6061-T6 aluminum. Fully compatible with 1.5" RRS Dovetail Standard, our plates feature precisely contoured anti-twist flanges for a perfect fit that prevents twisting …At 7.4" (189mm) long, the MPR-CL II provides no-parallax point positioning for non-collared lenses from 16mm and up on a full frame (35mm) camera. The built-in screw-knob style clamp allows mounting a camera body fitted with any Really Right Stuff camera base plate or L-Plate, with center reference marks for precise …Mobile Phone Clamp Overview. Designed for the mobile phone photographer, the Really Right Stuff Phone Clamp is our elegant solution for securely mounting almost any phone. Our feature-packed clamp adjusts to accommodate most phone widths from as small as 2.3" (58.5mm) up to 3.4" (87mm).Really Right Stuff make several different leveling heads to suit their range of tripods, and all of them have the option to include a lever-release lamp on the top to aid for quickly switching between different types of heads. TA-2U …Really Right Stuff clamps are "open channel" clamps. The advantage of this design is the ability to freely slide the plate within the clamping channel: center your camera for panos, shift a telephoto lens fore or aft to find the best balance point. Clamps are usually comprised of a base with 2 side jaws.The Really Right Stuff PG-02 MK II Pano-Gimbal Head, which costs anywhere between $750 to $950, is designed for photographers who need to be able to quickly and easily adjust the pan and tilt of ...Instead, adopt the Really Right Stuff quick-release system. The RRS quick-release system is based on the Arca-Swiss standard and has two parts: a quick-release clamp and a quick-release plate. You always need both pieces of the system. The clamp will stay on your tripod head/accessory all the time, and the plate will stay on your camera all the ...The Tripod Leg Quick Detach (QD) attaches to the leg of a Really Right Stuff tripod to create a mounting place for any push-button QD strap. Mounting one collar is perfect for using a QD in a single-point orientation. Alternatively, customers can purchase two Tripod Leg Collars to create multiple contact points. Using both collars in tandem ...The package that I have is the Really Right Stuff TFA-01 with the lightweight BH-25 ball head. This ball head has a load capacity of 4KG, but weighs only 7.8oz. If you need something a little beefier, a BH-30 will also work well on the TFA-01, and this has a capacity of 6.8KG and still only weighs 11.2oz. As well as a higher capacity, the BH-30 ...Home. Our Story. In 1990 Bryan Geyer invested his savings and retirement funds into the creation of Really Right Stuff, the solution to ill-fitting generic quick-release plates. For …The Really Right Stuff PG-02 MK II Pano-Gimbal Head, which costs anywhere between $750 to $950, is designed for photographers who need to be able to quickly and easily adjust the pan and tilt of ...Feb 20, 2019 · In addition to the clamps, Really Right Stuff has developed many different accessories that can be used with the BH-55 ballhead. You can attach panoramic rails, macro rails, 3D / stereographic bars and other accessories made by RRS to extend the functionality of the head. Nov 06, 2023. Jaron Schneider. Really Right Stuff announced a new L-bracket called the MC-LS that is designed to work on basically any camera with the classic SLR design with …LCF-103: Lens Foot for Sony FE 400mm f/2.8 GM OSS and FE 600mm f/4.0 GM OSS Lenses. Boost your lens stability with our specially engineered lens plates. Elevate your photography with secure support. Explore our collection of lens plates now!MPR-73: 73mm Multi-Purpose Rail. $70.00. Explore RRS's Arca Rails. Precision-engineered for compatibility and stability, they provide a seamless, secure connection for your outdoor equipment. TA-4-LBGP Profile Knob. $65.00. 1. 2. Next. Elevate your tripod setup with versatile accessories. Enhance stability and creativity in your photography. Explore our collection now! Feb 21, 2018 · Camera accessories company Really Right Stuff (RRS) has announced that it will be moving both its headquarters and its manufacturing operations to Lehi, Utah, where it will have access to a building that is 2.5 times larger than its current location. The company points toward increasing costs in California, where it is presently located, as the ... The TVC-34 Versa Series 3 Mk2 from Really Right Stuff is a mid-weight carbon fiber tripod designed for use in both the field and studio.. Constructed from Really Right Stuff's patented carbon fiber weave, the TVC-34 weighs in at 4.4 lb and can safely support up to 50 lb. It's 4-section leg design allows the tripod to extend to a maximum height of 58.5" and …The Macro 150 is the ideal tool for fine-focus adjustment for precise macro compositions. Focus stacking is easier than ever with the Macro 150 thanks to an integrated zeroing dial and a lead screw with a 1mm pitch, meaning one revolution of the knob equals exactly 1 mm of travel. Backlash and drift are essentially eliminated due to tight ...Really Right Stuff | 640 followers on LinkedIn. Your first choice for camera support systems with products of soul-satisfying uncompromising quality, simple convenience and superior total service.The MPRS-40 and MPRS-80 are made for the Canon 800mm and 600mm F/11 prime lenses. These lightweight, extendable lenses makes proper balancing difficult; the MPRS-40 and MPRS-80 solve that problem by allowing the foot to slide back to the balance point when the lenses are extended for use, and forward when in the stowed position. The …Really Right Stuff have a reputation for beautifully made gear, and the TFA-01 Ultra Pocket Pod is no exception. All of the parts fit together perfectly with no looseness or give that can lead to movement. After using the TFA-01 Ultra Pocket Pod for a while now with both DSLRs and mirrorless cameras, I love it.New universal L-bracket makes it a breeze to switch from portrait to landscape orientation during tripod shoots. (Image credit: Really Right Stuff) Really …The two-piece L component has a 28.1mm-wide cut-out for cable pass-through, it can also be slid away from the camera, or removed entirely. (Image credit: Really Right Stuff) The L-bracket will attach to any Arca-Swiss tripod head via RRS's Dovetail Standard mount, and it incorporates RRS-Lock, enabling lens …The bottom rail comprises a Really Right Stuff-compatible dovetail that mates with your ballhead clamp while the stage integrates our patented lever clamp that connects directly to your Really Right Stuff camera plate. Camera to subject distance can be adjusted in minute increments for super-fine focus; lead screw delivers 1.25mm of …Really Right Stuff clamps are "open channel" clamps. The advantage of this design is the ability to freely slide the plate within the clamping channel: center your camera for panos, shift a telephoto lens fore or aft to find the best balance point.A "Sale Pending" sign is posted in front of a home for sale on Nov. 30, 2023, in San Anselmo, California. Real estate agents face lower commissions after a major …The TVC-34 Versa Series 3 Mk2 from Really Right Stuff is a mid-weight carbon fiber tripod designed for use in both the field and studio.. Constructed from Really Right Stuff's patented carbon fiber weave, the TVC-34 weighs in at 4.4 lb and can safely support up to 50 lb. It's 4-section leg design allows the tripod to extend to a maximum height of 58.5" and … Really Right Stuff camera body plates are all custom designed for each camera body and precision machined from solid blocks of 6061-T6 aluminum. Fully compatible with any RRS quick-release system, our plates feature precisely contoured anti-twist flanges for a perfect fit that prevents twisting between the camera and our plate. Really Right Stuff camera body plates are all custom designed for each camera body and precision machined from solid blocks of 6061-T6 aluminum. Fully compatible with any RRS quick-release system, our plates feature precisely contoured anti-twist flanges for a perfect fit that prevents twisting between the …Really Right Stuff camera body plates are all custom designed for each camera body and precision machined from solid blocks of 6061-T6 aluminum. Fully compatible with 1.5" RRS Dovetail Standard, our plates feature precisely contoured anti-twist flanges for a perfect fit that prevents twisting between the camera and our plate. All of our quick ...Natural life.com, Walmart st croix falls, Okeefe funeral home, Tj pavilion, Rienergy, Mccormick and schmick's, Bludsos, Washington department of corrections, Place bridge academy, Old globe san diego, Fred again concert, Get away house, Walmart huntingdon, Tsc lincoln ne

TA-LBC: Round Lever Release Clamp. $155.00. Effortlessly secure your gear with lever-release clamps. Elevate convenience and stability. Explore our lever-release clamps now!. Baton rouge general medical center

Really really right stuffblackbird bend casino

Really Right Stuff are an American company, and fine folks to deal with directly. However, B&H also stocks all of their products, and likely offers cheaper shipping options for most people. I’m in Canada and B&H will ship to me for free on this product, and also let me pre-pay all tax and duties. The same can be said for many other ...User manual for the BH-55 Ball Head. In this manual you willl find information including specs, features, care and operation instructions.The LCF-21 Replacement Foot from Really Right Stuff is designed for the NIKKOR Z 70-200mm f/2.8 VR S, NIKKOR Z 100-400mm f/4.5-5.6 VR S, and NIKKOR Z 400mm f/4.5 VR S lenses. This foot is compatible with most Arca-type clamps and features a double-dovetail design that allows accessories to attach to the bottom or the top of the foot.This Really Right Stuff camera body L-set is custom designed for the Nikon D780 and precision machined from solid blocks of 6061-T6 aluminum. Fully compatible with any 1.5" standard dovetail (RRS standard) quick-release system, this plate features a precisely contoured anti-twist flange for a perfect fit that prevents twisting between the camera and …Really Right Stuff Ascend-14 4-Section Carbon Fiber Compact Travel Tripod with 22mm Ball Head. $1,555.00 $ 1,555. 00. FREE delivery Jan 31 - Feb 2 . Only 6 left in stock - order soon. Really Right Stuff BH-30 Ball Head with Full Size Lever-Release Clamp, 15 lb Capacity. 5.0 out of 5 stars. 7.Feb 21, 2018 · Camera accessories company Really Right Stuff (RRS) has announced that it will be moving both its headquarters and its manufacturing operations to Lehi, Utah, where it will have access to a building that is 2.5 times larger than its current location. The company points toward increasing costs in California, where it is presently located, as the ... The TFC-34 MK2 Series3 Ultralight Carbon Fiber Tripod from Really Right Stuff is compactly made to be easily packed for travel or storage while maintaining strength and not sacrificing features. The 4-section carbon fiber legs provide a load capacity of 86 lb and a maximum height of 58.3". The sturdy CNC-machined leg apex incorporates 1/4"-20 ...Versa Ground Pod : TVC-32G Mk2. $585.00. Explore table top and ground tripods for versatile support. Elevate your photography with stable solutions for various scenarios.Overview. This platform can be installed on all Really Right Stuff Universal, Series 2, or Series 3 Leveling Bases. Customers who have purchased a leveling base with a clamp can use this platform in place of the clamp, by simply removing the TA-LBC (clamp) via the 4 screws that hold it in place, and installing the TA-LBP platform with its 4 screws. The TFC-34 MK2 Series3 Ultralight Carbon Fiber Tripod from Really Right Stuff is compactly made to be easily packed for travel or storage while maintaining strength and not sacrificing features. The 4-section carbon fiber legs provide a load capacity of 86 lb and a maximum height of 58.3". The sturdy CNC-machined leg apex incorporates 1/4"-20 ... SEND RETURNS TO: Really Right Stuff Return Dept. 720 S 850 E. Lehi, UT 84043 USA. RULES. All returned or exchanged items must be in new condition, in their original box, and must include all packing material, manuals, and all accessories. Really Right Stuff is not responsible for personal items left in returned merchandise. One of the advantages of the Flash QR system is that Really Right Stuff has endeavored to make the clamps and plates small enough to not get in the way, but still secure enough to hold a flash and keep everything in alignment. Together the FA-QR1 and FA-QR-B measure only 1.3” x 0.8” x 1” over the locking tab. The FA-QR-B clamp on its …Mobile Phone Clamp Overview. Designed for the mobile phone photographer, the Really Right Stuff Phone Clamp is our elegant solution for securely mounting almost any phone. Our feature-packed clamp adjusts to accommodate most phone widths from as small as 2.3" (58.5mm) up to 3.4" (87mm). Level the apex of your tripod without having to adjust your legs. Use under a gimbal head to quickly find horizon and achieve proper load balancing on uneven and/or sloped terrain. Installs into Series 2 Tripods with SureGrip, or any other tripod with a male or female 3/8"-16 thread. Removable for travel ease. Overview. With the help of our customers' invaluable feedback, we have made our most compact and versatile adventure-tripod yet. The Ascend-14 tripod is a compact, all-in-one support package available in two sizes: 14—which favors a minimum stowed profile, ideal for packing in a carry-on bag, and 14L—which provides an extended working height … From Surf to the Studio with Nimi Natan. We’re excited to get our blog rolling again this month with a photographer whose unique style and story caught our eye over here at RRS. We had a chance to talk with Nimi Natan, a staff photographer for Big D Speedshop, a Dallas-based apparel company that blends classic surf styles with a grease monkey ... This Really Right Stuff camera body L-set is custom designed for the Nikon D780 and precision machined from solid blocks of 6061-T6 aluminum. Fully compatible with any 1.5" standard dovetail (RRS standard) quick-release system, this plate features a precisely contoured anti-twist flange for a perfect fit that prevents twisting between the camera and …The BH-40 Ball Head with Full-Size Lever-Release Clamp from Really Right Stuff is a 17.1 oz mid-sized ball head that will support camera-lens combinations weighing up to 18 lb. Crafted from aluminum and stainless steel, the BH-40 has all of the features you'd expect from a professional-level head. An over-sized, ergonomic locking T-knob allows 45 …The TVC-34 Versa Series 3 Mk2 from Really Right Stuff is a mid-weight carbon fiber tripod designed for use in both the field and studio.. Constructed from Really Right Stuff's patented carbon fiber weave, the TVC-34 weighs in at 4.4 lb and can safely support up to 50 lb. It's 4-section leg design allows the tripod to extend to a maximum height of 58.5" and …See all the ways you can get in touch with us further. See all articles. Help Center. PRODUCT GUARANTEE. All Really Right Stuff brand products are guaranteed to the original purchaser to be free of defects in material or workmanship for five (5) years from the date of purchase. Products will be repaired or replaced at our option. Made from solid stainless steel with ABP (Accidental Backout Prevention) foot grip. This unique seal keeps foot securely mounted without having to use thread locker fluid. Compatible with all RRS Tripods and Monopods, and some other tripods with 3/8"-16 sockets on the leg end; socket must be flush with base of the leg to be …The Really Right Stuff 38mm Screw-knob Clamp, mini-clamp with 1/4"-20 threaded socket is a great clamp for traveling because of it being lightweight. The B2-FABN mini-clamp has one 1/4"-20 threaded socket for screwing onto a 1/4"-20 threaded post or stud. This is also the perfect solution for shoulder straps such as Black Rapid and camera neck ...Really Right Stuff make several different leveling heads to suit their range of tripods, and all of them have the option to include a lever-release lamp on the top to aid for quickly switching between different types of heads. TA-2U … Ground & Tabletop Tripods. 2 products. Compact support, big performance. Field Grade. 2 products. A tripod for the hard use, utilitarian user who values function and performance over looks. Tripod Accessories. 13 products. Enhance your setup, optimize your shots, and stabilize every moment. LCF-103: Lens Foot for Sony FE 400mm f/2.8 GM OSS and FE 600mm f/4.0 GM OSS Lenses. Boost your lens stability with our specially engineered lens plates. Elevate your photography with secure support. Explore our collection of lens plates now!The Really Right Stuff MC-LS Universal L-Set is available here from B&H Photo. As always, using our links for your purchases is greatly appreciated. For international buyers, B&H Photo offers free shipping to Canada and a few other locations on orders over $100. They also allow you to pre-pay any taxes owed and display the final total in ...Really Right Stuff camera body plates are all custom designed for each camera body and precision machined from solid blocks of 6061-T6 aluminum. Fully compatible with any RRS quick-release system, our plates feature precisely contoured anti-twist flanges for a perfect fit that prevents twisting between the …30+ years dedicated to the uncompromising pursuit of creating the best photography equipment... Our Story. Featured Products. F-Stop Medium Tripod Bag. $46.00. Leica Q3 …The Multi-Clamp securely mounts to any round stock up to 3.5 inches (89mm) in diameter. With the Flat Surface Adapters deployed, mount to any flat surface up to 2.4 inches (63mm) in thickness. There are five threaded holes in the Multi-Clamp: four 3/8"-16 threaded holes, and one 1/4"-20 threaded hole. Use these built-in sockets to mount your ...Jan 10, 2018 · The Really Right Stuff TFC-14 tripod can get very low to the ground, which makes stable shooting from low angles a breeze. The ratcheted angle stops for the legs are easy to use. Really Right Stuff's SOAR Division is the embodiment of unparalleled precision, reliability, and performance. We specialize in creating superior equipment solutions designed to meet the exacting needs of military, law enforcement, and shooting sports professionals. Every product we develop is carefully engineered and crafted in the USA ...Really Right Stuff ball heads now utilize our patented R-Mount interface for mating the clamp to the ball head's stem in the most secure manner possible. The R-Mount's rosette will prevent twisting at the coupling point between the two pieces of hardware over time, and will assist in eliminating "play" that results from regular use on the ...Really Right Stuff Light & Shadow. Light & Shadow. From Surf to the Studio with Nimi Natan. We’re excited to get our blog rolling again this month with a photographer whose …Home. More. Accessories. Tripod Accessories. Selected Filters. No filters applied. Brand. Really Right Stuff, LLC (1) Price. Other. # of Products: Sort By: All Tripod Accessories. …The two-piece L component has a 28.1mm-wide cut-out for cable pass-through, it can also be slid away from the camera, or removed entirely. (Image credit: Really Right Stuff) The L-bracket will attach to any Arca-Swiss tripod head via RRS's Dovetail Standard mount, and it incorporates RRS-Lock, enabling lens … The Really Right Stuff BM11-LPG is custom designed to make the most secure fit as possible for the Leica M11. Each plate is precision machined from solid blocks of 6061-T6, aircraft grade aluminum. The Leica M11 camera plate is fully compatible with any standard 1.5"-dovetail style quick-release system. This B2-LLR-II Lever-Release Clamp from Really Right Stuff is compatible with most Arca-type camera plates, camera bars, and multi-purpose rails. The jaws of the clamp open wide for plates to be top-loaded quickly and easily. The locking lever release is opened or closed by only using finger force, and once the clamp is …Really Right Stuff Harris Clamp Adapter (HCA) The RRS HCA should work with any Harris Bipod model. I opted to put one on a Harris Bipod S-BRM. This is probably the most popular of the Harris Bipod models, with a 6-9″ height range, notched legs, and a swivel base to cant the rifle for leveling if necessary. As you can see above, I also use a ...Really Right Stuff FUJIFILM GFX 100S L-Plate. B&H # REBGFX100SLS MFR # BGFX100S-LS. 12 Reviews. Key Features. Arca-Type Compatible Dovetail Mounts. Modular L-Plate with 1/4"-20 Mount. Quick Release Function on Each Axis. Maintains Port and Battery Door Access.Camera accessories company Really Right Stuff (RRS) has announced that it will be moving both its headquarters and its manufacturing operations to Lehi, Utah, where it will have access to a building that is 2.5 times larger than its current location. The company points toward increasing costs in California, where it is presently located, as …30+ years dedicated to the uncompromising pursuit of creating the best photography equipment... Our Story. Featured Products. F-Stop Medium Tripod Bag. $46.00. Leica Q3 …Really Right Stuff multi-use plates are designed for some camera bodies and scopes are precision machined from solid blocks of 6061-T6 aluminum. Fully compatible with any Arca-Swiss style quick-release system, our plates feature simple square anti-twist flanges that prevent twisting between the plate and the camera body. This quick release ... Clamp Rosette Adapter for R-Mount. Find the accessories, tools and equipment you need to take your photography to the next level. Explore our collection of accessories and tools now! Overview. The BD850-UL is the ultralight alternative the full-feature modular BD850 L-set for the Nikon D850 camera. The BD850-UL is perfect for those who want a low-profile and ultralight design. Really Right Stuff camera body plates are all custom designed for each camera body and precision machined from solid blocks of 6061 … The Really Right Stuff LCF-101 foot replacement is precision machined from a solid block of 6061-T6 aluminum and is fully compatible with 1.5" This updated foot (updated design based on LCF-100) replaces the Sony lens collar foot on Sony FE 100-400mm f/4.5-5.6 GM OSS, FE 70-200mm f/2.8 GM OSS, FE 70-200mm f/2.8 GM OSS II, or Sony FE 300mm f/2.8 ... Really Right Stuff offers flash hoops/rings in small, medium and large + two styles and of course, all types of adapters for major camera manufactures, so you should not have any trouble putting together a complete set up by purchasing an appropriately sized circular or semi-circular flash bracket which accepts the really right stuff flash …The TVC-34 Versa Series 3 Mk2 from Really Right Stuff is a mid-weight carbon fiber tripod designed for use in both the field and studio.. Constructed from Really Right Stuff's patented carbon fiber weave, the TVC-34 weighs in at 4.4 lb and can safely support up to 50 lb. It's 4-section leg design allows the tripod to extend to a maximum height of 58.5" and …Really Right Stuff TVC-33 Tripod Really Right Stuff TVC-33 I finally broke down and bought a decent tripod. Actually, I did more than that. I bought the best tripod that I could find. As is often the case, the best was also the most expensive - just under $1,000 delivered. I've made the classic mistakes that Thom Hogan warned against in his article - …I Hope You All Feel Terrible Now. How the internet—and Stephen Colbert—hounded Kate Middleton into revealing her diagnosis. By Helen Lewis. Max …The Really Right Stuff BA7IV camera body plate is custom designed for the most secure fit as possible on the Sony Alpha-7IV. Each plate is precision machined from solid blocks of 6061-T6, aircraft grade aluminum. The Sony A7IV camera plate is fully compatible with any standard 1.5"-dovetail style quick-release system. The plate also has ... The PC-LR features a built-in dovetail base, allowing you to mount it onto any Really Right Stuff ball head clamp. This allows using the ballhead itself to level the panning axis, thus eliminating the need for a leveling base in many applications. The increased speed and accuracy offered by the panning clamp makes setup for single-row panoramas ... Tutorials for things like panoramas, astrophotography and more. See all articles FAQs Frequently Asked Questions about Really Right Stuff and its products. ...The Really Right Stuff Ascend-14 Long Travel Tripod gave me reason to again include a 1-series option in the kit. If there is room for a high-performing compact, lightweight tripod in your kit and the funding permits, the Really Right Stuff Ascend-14 has your name on it. This tripod is an outstanding performer despite its small size and light ...Mobile Phone Clamp Overview. Designed for the mobile phone photographer, the Really Right Stuff Phone Clamp is our elegant solution for securely mounting almost any phone. Our feature-packed clamp adjusts to accommodate most phone widths from as small as 2.3" (58.5mm) up to 3.4" (87mm).The B2-FABN Micro Clamp from Really Right Stuff has a smaller footprint compared to other clamps on the market. The Micro Clamp accepts camera straps, becoming a convenient way of carrying your camera around, and many Arca-type camera plates, multi-purpose bars, camera bars, and L-brackets are compatible with the Micro Clamp. There …Really Right Stuff. @reallyrightstuff 7.43K subscribers 116 videos. Really Right Stuff is an American owned and operated business based in Lehi, Utah. We design, build and … Really Right Stuff B50D-L L-Bracket for Canon EOS 50D (A) Only 4 left in stock, order soon! $27.00. View Details. Really Right Stuff B30D Plate for Canon EOS 30D without BG-E2 Grip (A) Only 2 left in stock, order soon! $5.99. View Details. Really Right Stuff B350D-L L-Bracket for Canon EOS XT, XTi. . Tapville social, Pg plaza mall, Leukemia lymphoma society, Baldinis, Carrollton farmers branch tx, Factsmgt com, Christies appliance, Architectural surfaces, Kodak moments.